Does a hydraulic system make the clutch pedal effort easier than a mechanical linkage? A friend of mine says the effort will be the same because all the force is […]

Will a 2002 Chevy transmission work behind a ‘99 Chevy motor? Is wiring or computer an issue? I work at a junkyard and the interchange says one year only. This […]

I’ve got a direct-drive ski boat with a worn out 350 c.i.d. small-block Chevy. I’m thinking about building a new engine with modest goals. It’s a family boat, but I […]

I have a 1972 Jeep CJ-5 with a 3.73:1 gear and 33-inch M/T tires. The engine is an AMC 360 rebuilt with 8.75:1 compression, stock heads, and a COMP Thumper […]

I have a big-block Chevy in a ‘69 El Camino that I just purchased. I really don’t know much about the engine other than it is a 454 with an […]

I have a 2015 Silverado with a 5.3L with long tube headers and I’ve installed a Whipple supercharger. My 6-speed trans is now slipping. Can you give me any direction […]

I bought a set of TFS valve springs (PN 16918-16) for my Summit 8702 cam for an LS engine and I realized these springs are only good up to a […]

I’ve been reading you for years at various magazines like PHR, Hot Rod, and Car Craft. I’ve been curious about the lower end of the torque curve. Looking at various […]

I think I just tore up my second 200-R4 transmission running back and forth to the NSRA street rod show in York, Pennsylvania.  I had a Turbo 400 in my […]

I have a 2012 F-250 Ford built to use flex fuel. What is the best way to maximize miles per gallon? Is there any advantage to running 1/2 tank of 93 […]